-
×
Fleshlight Girls Autumn Falls - Cream
1 × $72.99
💜 Fleshlight Stroker, Fleshlight Air & Table Mount: Reliable Stroker System – Product Review (2025)
25
Oct
Oct
Fleshlight is an American company based in Texas, like us! They actually produce their items in the US (or in Spain for their European market). They’ve got a wide range of compact and full-sized strokers, both realistic and non-anatomical. What makes the line stand out, though, is that they have a few complimentary items that make it much easier to use Fleshlight strokers, making them way more approachable and ultimately longer lasting (see our notes about the dryer!).
Fleshlight Girls Stroker: Mia Malkova
The Fleshlight Girls line is a continually expanding series of full-sized, realistic strokers modeled after adult stars. Each model has a different internal texture, giving a slightly different feel from stroker to stroker. Orifices range from fantasy-style to realistic vulvas or butts, and include light, medium and dark skin tones. The Fleshlight Girls line includes an opaque container with screw on cap and base (also used to adjust suction) and can accommodate 8-9 inches in length and a 7 1/2-inch girth.
The Mia has a realistic, visually stimulating vulva and a wave-like internal feel at its entrance, which leads to a slightly more intense, gripping texture further in. I love that the pillowy entrance extends about 1″ beyond the canister, which makes the thrusting experience so much more exciting, fleshy, and realistic.
You can tighten or unscrew the cap on the end of the Fleshlight Girls strokers to increase or decrease suction. I like to open the cap fully, thrust in and then screw on the cap all the way for maximum suction. You can also leave the lid slightly unscrewed and hold your hand over the gap to increase/decrease suction to a smaller degree, but you have to kind of hold onto the cap because it rattles during use if left loose.
Fleshlight Mount
The Fleshlight Mount is a static clamped mount that attaches to a table or desk surface. It’s compatible with Fleshlight Girls strokers, Fleshlight Go, and Fleshlight Flight products. The mount can clamp to a surface up to ~1.75″ thick and has about a 1.25″ height from top of clamp to the stroker base, so the bottom of your stroker will be about 1.25″ higher than the surface it’s clamped to (or ~1.75″ for the Go/Flight adapter).
Ideally, you should have about 2″ of overhang to clamp onto, but I can successfully use it on about 1-1.25″ of overhang on my bathroom counter and my entertainment center. My computer desk has more overhang, but the clamp felt just as secure on the desk as it did on the other surfaces where there was less to latch onto. So either way, the clamp is strong and stable enough for thrusting.
Of course, my favorite application is to clamp the mount to my entertainment center in our bedroom and stream media on our tv while the clamp is positioned directly in front of the tv, to simulate fucking who I see on the screen. I’m 6′ and I prefer a surface height of about 31″ (clamped to our dresser). Initially, I clamped the mount to the bathroom counter (35″) but realized I enjoyed a lower height and didn’t necessarily want to stare at myself in the mirror. An adjustable-height desk will work well, too. The mount keeps the stroker at a 180-degree angle, so unfortunately you can’t tilt it. With proper clearance, you could also mount it upside down.
Mind you, this clamp is stationary, so it’s a different experience from an automatic stroker (my favorites are the Lovense Solace Pro or the Svakom Sam Neo). Having a masturbator work on you is next level, but sometimes I don’t want to deal with an app, buttons, or the set up/tear down process of a stroking machine. The Fleshlight mount and dryer make the process much more sustainable from start to finish. Keep in mind that properly cleaning and drying your sleeves will extend their usable life. More bang for your buck.
Fleshlight Air (Dryer for Strokers)
The Fleshlight Air is a dryer with two laptop-style fans in the base that circulate air upwards through compatible Fleshlight strokers (works with Fleshlight Girls, Go, Quickshot and Flight products). There are 3 adapter rings for the dryer, labeled “Go,” “Flight,” and “Quickshot.” It has 3 settings: low, medium, and high. These dry for 20, 40, and 60 minutes, respectively. When drying the Fleshlight Girls stroker, their largest product, I use the highest setting to fully dry the inner channel. If your stroker has a cap, you’ll want to make sure that you remove it so that air can circulate properly during the drying process.
The Fleshlight Air isn’t particularly loud; it just sounds like a small vent and registers at about 42 dB. For reference, my wife’s hair dryer registers at 75dB, so it’s substantially quieter. The device itself measures about 3″ x 5.75″ but is really lightweight and feels pretty durable due to its super simple design. The only downside is that it is branded with “Fleshlight” on the base and adapter rings, so you can’t really explain this away if it’s left out in the open – it may raise questions.
Fortunately, though, the Fleshlight Air has such a simple design that you can use it for a bunch of other strokers or products as long as they can rest upright in the base of the dryer. I’ve personally used it for things like the Fuck Flask, Tenga Flip products (though these kind of tilt to the side, so you might have to use a shim of some kind to get it positioned correctly for proper airflow), and Tenga spinners.
Final Thoughts
I got my Mia Malkova full-sized stroker earlier this year but really felt compelled to write about it after trying the full Fleshlight system including the dryer and mount. All together, the stroker-clamp-dryer system makes the whole process more approachable; I know exactly how it all works because all components are so simple. Each piece does its job.
The Fleshlight Air dryer can be repurposed to dry all kinds of other strokers as long as they can rest upright in the base (and ideally have an outlet hole for optimal airflow). The dryer and mount also work with the wide range of Fleshlight strokers because they both have adapter rings. If you’re tired of the sleeve or stroker you’ve got, you can just upgrade it without having to upgrade other parts of the system. There’s also the added bonus of buying US-made. Highly recommend!
Out of stock
